Focus on LCD display solution providers
In recent years, LCD splicing screens have gradually entered people's field of vision. With the functions of clear picture, high brightness, and low power consumption, they have quickly occupied the large-screen splicing market. Most of you know about LCD splicing screens . There are four ways to install LCD splicing screens : wall-mounted bracket installation, floor-mounted cabinet installation, embedded installation, and three-dimensional bracket installation. These installation methods will use a bracket. The front maintenance bracket is used well, which will save a lot of unnecessary trouble in the later stage. How to choose a mounting bracket? What's so special about it?
First of all, the material of the stent is very important. It must have a certain degree of hardness, can bear the weight but not be too heavy, and must be resistant to oxidation. It is not easy to be corroded. The general customer chooses aluminum alloy, and better uses zinc. Aluminum alloy. After reading the material, there is another important detail --- the connection point of the bracket. The connection point of the bracket must be connected by corner codes so that the structure can be more stable and firm.
There are two types of maintenance methods for LCD splicing screens: one is the pre-maintenance method, and the other is the post-maintenance method with reserved access channels.
The pre-maintenance maintenance method is generally to take off the screen in front of the large screen and then perform maintenance; there are two types of electric and manual; the large screen installation of this maintenance method is very complicated, and only two layers of large screens can be spliced (recommended At most three layers); At the same time, because there is a margin to remove the large screen from the front, it will inevitably lead to the large screen patchwork, which will affect the display effect to a certain extent.
Reserve the maintenance method for the maintenance channel.
It is a prerequisite, and there needs to be enough passageway behind the screen, about one meter in width, and the requirements for the construction space are more demanding. Not only that, this will compress the visible space to a certain extent, which is often aimed at Cabinet-mounted LCD splicing screens are used more often.