Focus on LCD display solution providers
When we make a large screen, we sometimes think of a stitching method that bends the LCD splicing screen. First, consider the aesthetics and personality of the curved shape. Second, some rooms are designed to be curved in order to install screen walls. When it can be integrated with decoration and also designed as a curved shape, it will achieve better visualization. It is used in this way, for example in some showrooms of companies, museums, etc. How to make a curved LCD screen? Detian Technology introduces to you, let's find out together! I hope to help you.
First, the curved LCD splicing screen is not a single screen, but curved
At present, the installation method of liquid crystal displays is also horizontal and vertical. Whether it is a TV or a screen, the general ratio is 16: 9. Although some TVs have been bent, there is no large-scale production or application of LCD in the field of splicing. Therefore, the curved LCD splicing screen is actually an arc effect achieved by some splicing devices, and the single-chip screen is not simply designed to be curved.
Second, how to make a curved LCD splicing screen
The key to understanding the composition of curved LCD splicing screens is our design and installation issues. Due to different traditional stitching, the issue of entering arcs must be considered in the initial design. Under normal circumstances, the arch will be designed between 170 and 178 degrees. The lower the degree, the larger the arc, and the more obvious the effect. The number of pins in the figure reflects the effect of the installation. Secondly, the number of joints should be less and less, especially the more columns, the more natural the curvature, the better the effect. We recommend making arches in more than 5 columns, otherwise you will imagine the real effect after stitching. There are differences. In addition to installation and construction, the effect of the arch is in addition to the previous design. In fact, the test technology is installed. Our installation engineer assembles the installation bracket according to the design of the arch, and then adjusts the distance between the screen and the seam. Testing technology, it takes a long time to adjust, that is, keep the effect on the screen is not tight.
Therefore, if our users want to design a curved LCD splicing screen, the first thing to remember is that their installation environment is not allowed. The second is the previous design, which includes the size of the arches, the amount of space and the impact of the amount. Look for experienced manufacturers to ensure that the installation can be completed without problems.